Inglés
Sueco
RusoGPR Accesorios
Overview
Normalmente los equipos electrónicos e incluso algunos programas de computadora necesitan componentes extras para llevar a
cabo todas las funciones diseñadas por el fabricante. Estos componentes extras pueden ser cables,
adaptadores de conectores, agarraderas, dispositivos de seguridad etc.
A primera vista es difícil decidir que tipo de componentes extras el cliente va a necesitar. Nuestra política es estar al tanto de los
comentarios de nuestros clientes, de los problemas y necesidades que ellos encuentran en su trabajo diario. Por esa razón nuestro surtido
de accesorios es dinámico y está creciendo y expandiéndose constantemente.
En nuestra página de accesorios usted puede encontrar todos los componentes extras o de suporte que ofrecemos en la actualidad. Contáctenos
si por alguna razón usted no encuentra el tipo de cable, agarradera o
adaptador que necesita. Nosotros trataremos de hallar
una solución razonable que acomode sus necesidades.
Overview
SVC-819
The SVC819 is the only cart on the market specifically designed to be able to do bistatic
surveys with large VHF antennas and the SIR3000 from GSSI. As all other carts from
Geoscanners AB this cart is completely built using fibre glass pipes and plastic
junctions to result in a very rugged and durable construction. The SVC819 comes
equipped with a ENC820 survey wheel encoder and the required cables to operate it.
SVC-820
The SVC-820, our most popular cart, is used for our U-Explorer system. As all other carts from
Geoscanners AB this cart is completely built using fibre glass pipes and plastic
junctions to result in a very rugged and durable construction. The SVC820 comes
equipped with a ENC820 survey wheel encoder and the required cables to operate it.
SVC-821
The SVC-821 cart is used for our U-Explorer mini system. As all other carts from
Geoscanners AB this cart is completely built using fibre glass pipes and plastic
junctions to result in a very rugged and durable construction. The SVC821 comes
equipped with a ENC820 survey wheel encoder and the required cables to operate it.
SVC-822
The SVC-822 cart is mainly used for the air-launched antenna FLB-390.
As all other carts from Geoscanners AB this cart is completely built using fibre glass pipes and plastic
junctions to result in a very rugged and durable construction. The SVC822 comes
equipped with a ENC820 survey wheel encoder and the required cables to operate it.
GSH4921
The GSH4921 cart is used for our Scorpio system. As all other carts from
Geoscanners AB this cart is completely built using fibre glass pipes and plastic
junctions to result in a very rugged and durable construction. The GSH4921 comes
equipped with a ENC820 survey wheel encoder and the required cables to operate it.
ENC711
This cart was specifically designed to work together with the 5103 antenna from GSSI or the otherwise known as "the 400". This cart is
particularly useful for surveying walls when the operator has to hold the antenna against the wall all the time. The ENC711 has an
inbuilt survey wheel allowing for an easy way of carrying on with distance mode surveys. The survey cart is completely made out of
milled aluminum and therefore is very light and durable.
Go to the ENC711 web page ...
Go to the ENC711 web page ...
GST806
The survey trailer GST806 is a very rugged and light weight trailer for antennas large geotechnical antennas. It is designed so
one can tow it behind any vehicle equipped with a standard 50mm hitchball. The trailer is completely built out of fibre glass
and plastic junctions to prevent interference with the antenna elements. It also has an integrated survey wheel encoder for
applications requiring exact locations of features under the ground.
Go to the GST806 web page ...
Go to the GST806 web page ...
GTP-901
This survey tripod for borehole antenna applications was designed at a special request from one of our customers in Germany. It
was specifically designed to allow a large distance between the ground and the pulley for the cable. It is completely built
using fibre glass pipes, plastic junctions and custom made POM parts resulting in a rugged and durable construction yet very light weighted.
Go to the GTP-901 web page ...
Go to the GTP-901 web page ...
Overview
ECU902
The ECU902 is a display unit for quadrature survey wheel encoders with no index output. This unit in particular is very useful for assessing the cable length in applications such as borehole antennas surveys. Connected to the encoder of the tripod prove to be extremely useful in tomography surveys. The unit is absolutely transparent to the operation of the encoders connected to it and provides very bright readings even with direct sunlight.
Go to the ECU902 web page ...
TRG-715
The dual output triggering device TRG-715 is a unique piece of equipment that we developed for railway surveys in Denmark. We needed a three channel radar in order to be able to scan the ballast on the sides and in the front, we decided to use two independent ground penetrating radars. The problem came when we needed to syncronize the data files from both units; that's how the dual output triggering device was born.
Go to the TRG-715 web page ...
TRG-817
The success of our GeoPointer X© wouldn't have been completed without our triggering device TRG-817. It is essentially this device that makes so easy to incorporate GPS positions and GPR markers into a unified database for a later linking process. This unit can be used inside a car or wherever the main ground penetrating radar unit is located to facilitate the use of both acquisition softwares.
Go to the TRG-817 web page ...
ENC820
This hollow shaft magnetic encoder was developed primarily for our line of survey carts.
It happened that some of our customers are very skilled manufacturing survey accessories as well and
they wanted to buy just the encoder from us. We then decided to make the encoder solution for all of
our customers who wanted it. The unit can be purchased with different magnetic rings to best suit
your particular application.Go to the ENC820 web page ...
Overview
Extra accessories
Control unit harness with computer tray
Our harness, with fastening for our Akula 9000 control unit and a Panasonic
CF-19 notebook, is the most comfortable solution for rough terrain survey equipment available on the market right now.
Used with our SVC-822 cart and FLB-390 antenna or the Scorpio-system it provides comfort as well as an ergonomic smart way of doing your survey. This offers the advantage of concentrating on the data collection process rather than on the discomfort of carrying the equipment.
GCB-antenna trays
Protection tray-kit for GCB-200 and 300
Protect your investment from scratches and extra ware by using this custom made protection sled tray.Easy to use and replace.
Fits the GCB-200 and 300 models.
Protection tray-kit for GCB-400, 500 and 700
Protect your investment from scratches and extra ware by using this custom made protection sled tray.Easy to use and replace.
Fits the GCB-400, 500 and 700 models.
Protection tray-kit for GCB-100
Protect your investment from scratches and extra ware by using this custom made protection sled tray.Easy to use and replace.
Fits the GCB-100 model.
GCB-antenna sleds
Protection tray-kit for GCB-200 and 300
Protect your investment from scratches and extra ware by using this custom made protection sled tray.Easy to use and replace.
Fits the GCB-200 and 300 models.
Protection tray-kit for GCB-400, 500 and 700
Protect your investment from scratches and extra ware by using this custom made protection sled tray.Easy to use and replace.
Fits the GCB-400, 500 and 700 models.
Also available in Large for the GCB-100.
